Internal USB version
Installation Guide
1 Turn off the computer
2 Mount the RDX QUIKSTOR in the
PC. The Eject/Power LED should
be on the lower right. Secure the
unit by using the four mounting
screws provided.
Power
USB
3 Connect the USB and power cables
to the RDX QuikStor
4 Connect the USB cable to the host
PC mother board or USB HBA.
Pin 1 location is marked on the
cable connector with a triangle ( ).
Consult your motherboard/
HBA manual for the Pin 1 location
on the mating USB connector
5 Turn on the computer
Warning:
• Connecting the USB Cable incorrectly
to the PC will result in damage.
• Verify PIN layout on the motherboard
versus cable connector PIN OUT.
PIN SIGNAL PIN SIGNAL
+5VDC
1
9
2
1
3
5
7
9
VCC
2
4
6
8
VCC
DATA-
DATA+
GND
USB0-
USB0+
GND
Key
USB1-
USB1+
GND
Key
10 USBOC
10
Product Registration
Register this product at
©2007 RDX is a registered trademark of ProStor Systems, Inc.
Part No. 433822-01
|
Shindaiwa Portable Generator DG150MI User Manual
Sony Camcorder CCD TR555E User Manual
Sony CRT Television KV XF25M80 User Manual
Sony eBook Reader 4 151 151 131 User Manual
Sony MP3 Player CFD F10 User Manual
Sony Network Router PCWA DE80 User Manual
Star Micronics Printer 4III User Manual
Sterling Plumbing Outdoor Shower 72250100 User Manual
Stow Music Mixer CMS 44S User Manual
Sylvania Speaker SP269 User Manual